Vacuum Master Shock Filling Tool
The Vacuum Master Shock Filling Tool is a revolutionary tool used to fill and bleed shocks, while eliminating air pockets inside. The "Vacuum Master" will also reduce the amount of oil wasted compared to hand bleeding a shock. This machine is perfect for any motorcycle professional or eager enthusiast that services shocks. This semi-manual filling machine will increase your efficiency, production, and “popularity”, with perfect consistency every time.
The "Vacuum Master" is both compact and powerful, making it easy to store and convenient to use in the shop or at the track.
NOW AVAILABLE!
There are a number of adapters available including:
- TSVM AM06100-90 degree M6x1.0 (Flat Head Screw type)-Most Race Tech & Ohlins Shocks
- TSVM AM05080-90 degree M5x.8 (Flat Head Screw type)-RT Hydraulic Preload Adjusters & some Ohlins Shocks
- TSVM AM04070-90 degree M4x.7 (Flat Head Screw type)
-
TSVM AM11100-Ohlins Steering Damper M11x1.0
-
TSVM AS3828WP-WP PDS 3/8"-28
-
TSVM AB Series-Assorted Bladder Adapters including 40/40.5, 42, 46, 48.5, 52, 54, 57, 60 and 64mm. Note: Bladder Adapters require an Adapter Plate that can be interchanged on all sizes.
When you purchase a Vacuum Master you can choose any two available Adapters and they will be included at no charge. If a Bladder Adapter is selected it will be accompanied by a single Adapter Plate TPVM ABP70 also at no cost. Any Bladder Adapters purchased afterwards will be sold individually without an Adapter Plate as the Plate is interchangeable.
Note: Requires 40 psi compressed air or nitrogen (preferred).
Step by Step Instructions - Click Here