| || |
"The best you've ridden is the best you know."
- Paul Thede
|Race Tech is here to support you in doing quality suspension work. This includes education like our Suspension Seminars as well as an extensive line of suspension tools. To find which tools are needed for specific models do a Product Search. Feel free to give us a call for more information. |
SHOCK BODY HOLDING TOOL
The Shock Body Holding Tool is ideal for clamping WP and Race Tech G3-S reservoirs. Can be sleeved to clamp any tube smaller than 58mm including Fork Tubes, Shock Bodies etc. Has four pinch bolts and can be used in a press for additional holding power. Machined from Billet Aluminum.
TFSH 58 – Add to cart
DAMPING ROD HOLDING TOOL
Some Damping Rods are difficult to remove because they spin. Making a special tool for each model can be a pain. This simple tool is a tapered aluminum rod. With a tap of a hammer, the taper wedges into the ID of most Damping Rods. You may be surprised with the holding power! Many Forks come apart easily, but this inexpensive tool is great to have when you need it.
TFDH 01 – Add to cart
RACE TECH SUSPENSION BIBLE
(By Paul Thede)
Based on Paul Thede’s wildly popular Race Tech Seminars taught around the world, this step-by-step guide shows anyone how to make their bike handle the way it should.
IBSB 01 – Add to cart
The Vacuum Master Shock Bleeding Tool makes high-tech shock filling more affordable. This machine not only saves time and increases efficiency, but it creates a "perfect bleed". The vacuum is so powerful it actually draws air out of the suspension fluid itself! ►Learn More
TSVM 01 – Add to cart
►TSVM - Parts List
FORK SPRING COMPRESSOR
(foot-operated, wall mounted)
The Foot-Operated Fork Spring Compressor is designed to work on most sport bikes and road racers with cartridge forks. It allows the spring to be compressed while the fork cap is removed from the rod. This design is wall mounted and really easy to use.
TFSC 02 – Add to cart
Our H-D Adapter is recommended by Factory Harley-Davidson for the disassembly of their cartridge forks.
TFSC A01 – Add to cart
FORK SPRING COMPRESSOR
Most street bikes with cartridges require a spring compressor. The factory unit is expensive and hard to use. This portable Fork Spring Compressor can be used on or off the bike on many models.
TFSC 01 – Add to cart
FORK SEAL DRIVERS
TFSD Series - Fork seal drivers. Split design. These are the standard of the industry.
FORK CAP WRENCH
This unique tool offers three different sizes to fit a variety of sport bikes.
TFCW 243241H - Add to cart
41-43mm BIG PISTON FORK (BPF)
FORK CAP WRENCH
This BPF Fork Cap Wrench, along with the Cartridge Holding Tool TFCH 06 fit Showa BPF (Big Piston Forks). These tools are a "must have" for disassembly and assembley of 09-11 GSX-R1000, 2011 GSX-R600, H-D XR1200X, 09-11 ZX-6R and 2011 ZX-10R.
TFCW 4549 - Add to cart
FORK CAP WRENCH
Fits 47 and 49mm Showa forks. Has 46 and 50mm octagons. Removes compression valving assembly on most models too.
TFCW 4650 - Add to cart
Fits 48mm KYB forks. Has 45 and 49mm octagons.
TFCW 4549 - Add to cart
Fits 48mm WP forks that require a special pin spanner wrench (slots - no hex).
TFCW 02 - Add to cart
WP 50mm DUAL-CHAMBER
Fits KTM WP 48mm Dual Chamber forks that require a large 50mm hex.
TFCW 50H - Add to cart
This Nitrogen Gauge does not require a wrench and easily reaches those recessed valve stems without an extension. It comes with a 1/4" flare nut quick coupling to work with the Quick Connect Hose (TSNH 48).
Nitrogen Gauge - TSNG 02 Add to cart
This Nitrogen Regulator is excellent quality. It has output to 300 psi and comes with a 1/4" flare nut quick coupling to work with our Quick Connect Hose.
Nitrogen Regulator - TSNR 01 Add to cart
The Quick Connect Nitrogen Hose has special 800 psi "finger tight" 1/4" flare nut quick couplings. This simple assembly works perfectly with our Nitrogen Regulator and Gauge.
Nitrogen Hose - TSNH 48 - Add to cart
WP SHOCK NITROGEN
The Race Tech WP Nitrogen Charging Tool works on all WP shocks with a reservoir. This tool is quick and easy to use and a "must have" if you work on a higher volume of WP shocks.
TSNC 02 - Add to cart
This tool is designed for gas charged shocks with self-sealing type rubber valves.
Used with Nitrogen Gauge - ►TSNG 02
TSNN 01 Nitrogen Charging Needle Add to cart
TPNN 01 Replacement Needle Add to cart
NITROGEN CHARGING BOLT
The Nitrogen Charging Bolt is a simple replacement of the standard WP Nitrogen Bolt and allows a shock to be pressurized with a standard Nitrogen Needle (TSNN 01). The OEM WP nitrogen filling system is pricey and cumbersome. ►Read more
These Nitrogen Charging Bolts can also be used to recharge some "non-rebuildable" shocks. ►Read More
SPNV 0512 - Add to cart
SHOCK SPRING COMPRESSOR
This Shock Spring Compressor is strong, light-weight and easy to use. It comes with 4 adapters (60, 66, 72, and 75mm) for different size spring collars and both an eyelet and clevis adapter. Invented by Jason Eldredge of Corporate Suspension in Utah, this one is so cool you’ll want to remove shock springs just for the fun of it. ►More Info
TSSC 02 – Add to cart
SHOCK SPRING COMPRESSOR
Provides quick removal and installation of most shock springs with spring rates up to 8 kg/mm. Features a Shaft Locking Device for safety.
TSSC 01 – Add to cart
This tool threads onto the Schrader Valve located on the reservoir cap for easy removal. (Simply screw the tool on and gently pull the cap from the body.)
TSCT 01 – Add to cart
CARTRIDGE HOLDING TOOLS
TFCH Series - Holds cartridge during disassembly and assembly.
View ►Product Search for applications.
BIG PISTON FORK
SEAL HEAD TOOL
Designed to remove and install the seal head assembly from the inner fork tube in 41 and 43mm BPFs. It has two hex sizes for the two sizes of forks. It allows changing fork springs without disassembling the valving stack.
TFCH 06 - Add to cart
This tool removes the Compression Body from the cartridge on Dual-Chamber KYB forks.
TFCT 35 - Add to cart
SHOCK CLIP TOOL
Removes shock retaining clips without digging into the shock bodies. Made of hardened tool steel. If you work on shocks you'll really like this one!
TSCP 01 - Add to cart
Four sizes available. Mini's, Standard 40-50mm, Street and WP PDS 50mm shocks. Allows the user to easily push shock seal heads into the bodies.
Tired of chewing up your shock spring collars when you adjust preload? Well we've got the tool for you! Can be used aggressively on preload adjusting collars with minimal damage. Many people chuckle at this one untill they try it. You'll like it.
TSPA 01 - Add to cart
WP PDS SHOCK NEEDLE
TSPS T Series - This is the PRO version of the needle removal tool. If you are servicing a lot of WP PDS shocks these are the one to have. It is driven with a T-handle, holds the Needle, and is self-centering in the body.
Note: It is ok for the pin diameter can be smaller than the hole it goes in to.
WP PDS SHOCK
The WP PDS Shock Needle Tool removes the Compression Needle from the shock body on early KTM WP PDS shocks. If you service any of these shocks, wether you only service 1 or 100, this is the economical way to go.
Required to install a SWCN 10 Telescopic Needle (15.0 pin circle x 2.4d pins).
For later model PDS shocks see TSPS T Series Pin Spanners.
TSPS 1524 - Add to cart
RT Pin Spanners have a unique pin design with a reverse taper to keep them from popping out during assembly and disassembly.
2 pins - 4 sizes total:
4.0 / 4.5 and 5.0 / 5.5mm
SHOWA 50mm SHOCK
PISTON RING TOOL
Allows removal of the stock shock piston without damaging the piston band on late model Suzuki Showa shocks. The tool fills the circlip groove allowing the piston to slide past without damage.
Fits 2010 -2011 RMZ250/450.
TSPR 50 – Add to cart
Voted as Dirt Bike Magazine's 25 Best Tools Ever Invented, the Sag Master is a tool that makes measuring Static "Race" Sag a snap because you read it directly. No more subtracting! ►Check out the Sag Master in action.
Also useful in determining proper spring rates and monitoring linkage and seal drag. Comes with instructions and, doubles as a tape measure!
TSSM 01 - Add to cart
T-HANDLE TOOL SET
Excellent quality Chrome Vanadium, deep socket, 6 point tools. Great price.
TTHS 02 - includes 8, 10, 12, 14 and 17mm - Add to cart
TTHS 03 - also includes a 13mm tool for the Euro models. - Add to cart
FORK BLEEDING TOOL
Unique self-starting design easily threads onto the damping rod. Baffled so the oil runs down the rod eliminating the typical mess. Available as a set. (Works great with the TFSC 01 & 02 Spring Compressors for street applications).
TFBT 02S - Add to cart
PRO OIL-LEVEL TOOL
Collapsible tube allows setting fork fluid levels with only two hands. Does not require a third hand!
TFOL 02 - Add to cart
Accuratly measures fork oil for filling Twin-Chamber forks. 500cc capacity
TFGC 500 - Add to cart
The Cartridge Rod Holding Tool allows you to more easily service Showa Twin-Chamber as well as most street cartridge forks. The tool holds back the spring allowing you to get to the bottom nut or the fork cap on the cartridge rod. Plastic design keeps shafts from being marred.
TFHP 01 - Add to cart
SHAFT HOLDING TOOLS
Holds fork damping rods, cartridges, shock shafts, etc. Unique design allows installation of dowels into the top of the vise jaws. The holding tools hang on the dowels instead of dropping on the ground when the vise is opened.
ALUMINUM VISE JAWS
Race Tech Vise Jaws gently, yet firmly, hold fork tubes, fork legs and other round objects in a “V” down to a diameter of 12.5mm (½”). The “V” is offset and overhangs the edge of the standard vise jaw to provide clearance for large diameter tubes.
Made to fit 4 to 6.5” Craftsman vises with removable jaws. These jaws have a bolt spacing of both 2.5 and 3 inches and fit other brands. They can be drilled to fit other makes of vises as well.
Pre-drilled for the pins supplied with Race Tech’s Shaft Holding Tools (TFSH Series).
TMVJ 065 - Add to cart
SHOCK SHAFT BUSHING
Used to install shock shaft bushings into seal heads. The set comes with 12.5, 14, 16, and 18mm drivers.
TSBD SET - Add to cart
SHOCK SEAL "BULLET"
Shock Seal Bullet Tools make installing seal heads onto shock shafts quick and safe. They eliminate the possibility of seal damage when installing the seal head onto the shaft. This tool is a must for serious tuners.
YZ RESERVOIR CAP
This tool is used to tap the bladder cap down to remove the snap ring on late model YZ's eliminating the possibility of damage to the Schrader Valve.
TSRC 01 - Add to cart
17, 19, 22, 24 mm
HEX AXLE TOOL
This Axle tool, made of hardened tool steel, fits many sport and dirt bikes.
TFHD 1724 - Add to cart
Remove and replace fork tubes from fork bottoms (AKA axle clamps, fork lugs, etc).
TFTT 01 - Add to cart
Removes burrs resulting from grinding factory peening during Fork Gold Valve installation.
TMBD 08 - Add to cart
Used to service shock compression adjusters.
Note: The punch marks at the threads must be drilled 1 mm deep prior to removal.
Stop rounding off the edges of your adjusters. These sockets allow you to perform fork preload changes more easily. Specially designed for fork preload adjuster size and shape.
TFPA 14 - Add to cart
TFPA 17 - Add to cart
The Fork Compression Adjuster tool is basically a super-stubby screwdriver. It is designed to fit between the handlebar and the top of the fork tube.
TFCA 01 - Add to cart
WP 4CS FORK CAP TOOL
This pin spanner is a dual-purpose tool for the WP 4CS Fork. It allows you to remove the fork cap AND by flipping it over, the Compression Base on the bottom of the fork.
TFCW PS38048 - Add to cart
SHOWA TAC FORK CAP TOOL
This is a dual-purpose tool for the Showa SFF Air TAC Fork. This tool allows you to remove the Fork Compression Valve Assembly from the top of the cartridge AND, by reversing it, remove the Base Bolt on the bottom of the fork.
TFCT 3602 - Add to cart